Pressure Washer Pumps & Repair Kits (12)

    Sort by: 

    Results for

    Pressure Washer Pumps & Repair Kits (12)

    hover over image to zoom

      SN:

      MODEL YEAR:

      MODEL SPECS
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-031
        General Pump Solid Shaft Pump
        General Pump TS2021

        PART NUMBER: 030-031

        SN:

        PART DESC: General Pump Solid Shaft Pump

        Model Year:

        Details
        Cat. Page #:1755
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Solid Shaft
        • Bore: .787"
        • Stroke: .630"
        • Gallons Per Minute: 4.5
        • Pounds Per Square Inch: 3,500
        • RPM: 1,125
        • GHP: 10.8
        • Made By: An OEM supplier
        • T Series 47
        • Triplex plunger pump with solid shaft
        • Nickel-plated forged brass manifold with exclusive lifetime warranty
        • Heavy-duty tapered roller bearings
        • Oversized connecting rods for maximum life
        • Maximum inlet pressure 125 PSI
        • Maximum fluid temperature 165° F
        • Inlet port thread 1/2"-14 BSP-F
        • Discharge port thread 3/8"-19 BSP-F
        • Shaft diameter .945"
        • Pump dimensions 12.6" x 9.2" x 6.9"
        • Maximum inlet vacuum 9 ft., water (7.9 Hg)
        • Crankcase oil capacity 40.6 oz.
        • Manufacturer warranty applies
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-015
        General Pump Gas Flanged Pump
        General Pump TX1510G8UI

        PART NUMBER: 030-015

        SN:

        PART DESC: General Pump Gas Flanged Pump

        Model Year:

        Details
        Cat. Page #:1754
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Horizontal Gas Flanged
        • Bore: .591"
        • Stroke: .394"
        • Gallons Per Minute: 4.0
        • Pounds Per Square Inch: 3,000
        • RPM: 3,400
        • GHP: 12.3
        • Made By: An OEM supplier
        • TX Series 63
        • Triplex plunger pump
        • Built-in unloader and downstream injector on left side of manifold
        • 1" hollow shaft
        • Flanged for direct couple to gasoline engines
        • SAE J609B
        • Large, lightweight connecting rods
        • New long life low and high pressure seals
        • Forged brass manifold with exclusive lifetime warranty
        • Maximum inlet pressure 125 PSI
        • Maximum fluid temperature 165° F.
        • Inlet port thread 1/2"-14 BSP-F
        • Discharge port thread 3/8"-19 BSP-F
        • Pump dimensions 8.4" x 8.3" x 4.8"
        • Maximum inlet required, flooded
        • Crankcase oil capacity 14 oz.
        • Manufacturer warranty applies
        Model Listings
        Part Listings

        NEW

        Read Reviews
        758-909
        Stens Vertical Pump
        3000 PSI, 2.3GPM

        PART NUMBER: 758-909

        SN:

        PART DESC: Stens Vertical Pump

        Model Year:

        Details
        Cat. Page #:1753
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Vertical
        • Gallons Per Minute: 2.3
        • Pounds Per Square Inch: 3,000
        • RPM: 3,400
        • GHP: 6.5
        • 7/8" Key Shaft
        • Thermal valve protects pump from overheating
        • Detergent suction device
        • Forged solid brass pump head
        • Inlet: 3/4" NH Male
        • Outlet: 22mm Male
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-303
        Comet Gas Flanged Pump
        Comet 6525.0001.00

        PART NUMBER: 030-303

        SN:

        PART DESC: Comet Gas Flanged Pump

        Model Year:

        Details
        Cat. Page #:1753
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Hotizontal Gas Flanged
        • Bore: .591"
        • Stroke: .218"
        • Gallons Per Minute: 2.2
        • Pounds Per Square Inch: 2,500
        • RPM: 3,400
        • GHP: 6.4
        • Made By: An OEM supplier
        • 1/2" FGH Inlet - 3/8" MPT Outlet
        • Built-in uniflow unloader and chemical injector
        • Built-in easy start
        • Quick mount flange
        • Stainless steel plungers
        • Steel shaft with built-in key
        • One oil cap for travel and operation
        • Stainless steel check valves
        • Forged brass manifold
        • Patent registered ball bearing design
        • Capacity of 4.5 oz pump oil
        • Shaft diameter 3/4"
        • Maximum inlet pressure - 120 PSI
        • Maximum fluid temperature 145 degrees F
        • Inlet port thread - 1/2" FPT
        • Discharge port thread - 3/8" MPT
        • Manufacturer warranty applies
        Model Listings
        Part Listings

        NEW

        Read Reviews
        758-905
        Stens Vertical Pump
        2500 PSI, 2.2 GPM

        PART NUMBER: 758-905

        SN:

        PART DESC: Stens Vertical Pump

        Model Year:

        Details
        Cat. Page #:1753
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Vertical
        • Gallons Per Minute: 2.2
        • Pounds Per Square Inch: 2,500
        • RPM: 3,400
        • GHP: 5.5
        • 7/8" Key Shaft
        • Thermal valve protects pump from overheating
        • Detergent suction device
        • Inlet: 3/4" NH Male
        • Outlet: 22mm Male
        • Does not have adjustable unloader
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-027
        General Pump Solid Shaft Pump
        General Pump TS1511

        PART NUMBER: 030-027

        SN:

        PART DESC: General Pump Solid Shaft Pump

        Model Year:

        Details
        Cat. Page #:1755
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Solid Shaft
        • Bore: .787"
        • Stroke: .472"
        • Gallons Per Minute: 4.0
        • Pounds Per Square Inch: 3,500
        • RPM: 1,450
        • GHP: 9.6
        • Made By: An OEM supplier
        • T Series 47
        • Triplex plunger pump with solid shaft
        • Forged brass manifold with exclusive lifetime warranty
        • Heavy-duty tapered roller bearings
        • Oversized connecting rods for maximum life
        • Maximum inlet pressure 125 PSI
        • Maximum fluid temperature 165° F.
        • Inlet port thread 1/2"-14 BSP-F
        • Discharge port thread 3/8"-19 BSP-F
        • Shaft diameter .945"
        • Pump dimensions 12.6" x 9.2" x 6.9"
        • Maximum inlet vacuum 9 ft., water (7.9" Hg)
        • Crankcase oil capacity 40.6 oz.
        • Manufacturer warranty applies
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-311
        Comet Gas Flanged Pump
        Comet 6525.1005.00

        PART NUMBER: 030-311

        SN:

        PART DESC: Comet Gas Flanged Pump

        Model Year:

        Details
        Cat. Page #:1753
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Hotizontal Gas Flanged
        • Bore: .591"
        • Stroke: .254"
        • Gallons Per Minute: 2.8
        • Pounds Per Square Inch: 2,500
        • RPM: 3,400
        • GHP: 7.7
        • Made By: An OEM supplier
        • 1/2" FGH Inlet - 3/8" MPT Outlet
        • Built-in uniflow unloader and chemical injector
        • Built-in easy start
        • Quick mount flange
        • Stainless steel plungers
        • Steel shaft with built-in key
        • One oil cap for travel and operation
        • Stainless steel check valves
        • Forged brass manifold
        • Patent registered ball bearing design
        • Capacity of 4.5 oz pump oil
        • Shaft diameter 3/4"
        • Maximum inlet pressure - 120 PSI
        • Maximum fluid temperature 145 degrees F
        • Inlet port thread - 1/2" FPT
        • Discharge port thread - 3/8" MPT
        • Manufacturer warranty applies
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-011
        General Pump Gas Flanged Pump
        General Pump TX1508G8UI

        PART NUMBER: 030-011

        SN:

        PART DESC: General Pump Gas Flanged Pump

        Model Year:

        Details
        Cat. Page #:1754
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Horizontal Gas Flanged
        • Bore: .591"
        • Stroke: .315"
        • Gallons Per Minute: 3.0
        • Pounds Per Square Inch: 3,000
        • RPM: 3,400
        • GHP: 9.2
        • Made By: An OEM supplier
        • TX Series 63
        • Triplex plunger pump
        • Built-in unloader and downstream injector on left side of manifold
        • 1" hollow shaft
        • Flanged for direct couple to gasoline engines
        • SAE J609B
        • Large, lightweight connecting rods
        • New long life low and high pressure seals
        • Forged brass manifold with exclusive lifetime warranty
        • Maximum inlet pressure 125 PSI
        • Maximum fluid temperature 165° F.
        • Inlet port thread 1/2"-14 BSP-F
        • Discharge port thread 3/8"-19 BSP-F
        • Pump dimensions 8.4" x 8.3" x 4.8"
        • Maximum inlet required, flooded
        • Crankcase oil capacity 14 oz.
        • Manufacturer warranty applies
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-023
        General Pump Gas Flanged Pump
        General Pump EZ3040GUI

        PART NUMBER: 030-023

        SN:

        PART DESC: General Pump Gas Flanged Pump

        Model Year:

        Details
        Cat. Page #:1754
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Horizontal Gas Flanged
        • Bore: .591"
        • Stroke: .374"
        • Gallons Per Minute: 4.0
        • Pounds Per Square Inch: 3,000
        • RPM: 3,400
        • GHP: 14.4
        • Made By: An OEM supplier
        • EZ Series 44
        • Triplex plunger pump with hollow shaft
        • Flanged for direct couple to gasoline engines
        • SAE J609B
        • Forged brass manifold with exclusive lifetime warranty
        • Flanged for mounting on up to 13 HP engines
        • Maximum inlet pressure 125 PSI
        • Maximum fluid temperature 165° F
        • Inlet port thread 1/2"-14 BSP-F
        • Discharge port thread 3/8"-19 BSP-F
        • Shaft diameter 1"
        • Pump dimensions 8.8" x 9.7" x 6.5"
        • Maximum inlet vacuum 3 ft., water (2.6" Hg)
        • Crankcase oil capacity 14 oz.
        • Manufacturer warranty applies
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-007
        General Pump Gas Flanged Pump
        General Pump TC1506GUI

        PART NUMBER: 030-007

        SN:

        PART DESC: General Pump Gas Flanged Pump

        Model Year:

        Details
        Cat. Page #:1754
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: Horizontal Gas Flanged
        • Bore: .591"
        • Stroke: .256"
        • Gallons Per Minute: 2.6
        • Pounds Per Square Inch: 2,700
        • RPM: 3,400
        • GHP: 7.21
        • Made By: An OEM supplier
        • TC Series 60
        • Triplex plunger pump
        • Compact design
        • 3/4" hollow shaft
        • Flanged for direct couple to gasoline engines
        • SAE J609A
        • Premium built-in trapped pressure unloader on left side of manifold with an exclusive lifetime warranty
        • Maximum inlet pressure 125 PSI
        • Maximum fluid temperature 165° F.
        • Inlet port thread 1/2"-14 BSP-F
        • Discharge port thread 3/8"-19 BSP-F
        • Gauge port 1/8" maximum inlet required
        • Flooded pump dimesions 10.4" x 8" x 7.7"
        • Crankcase oil capacity 11.8 oz.
        • Manufacturer warranty applies
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-450
        General Pump Pressure Washer Pump
        General Pump EZ4040G

        PART NUMBER: 030-450

        SN:

        PART DESC: General Pump Pressure Washer Pump

        Model Year:

        Details
        Cat. Page #:
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: EZ Series 44
        • Bore: .512"
        • Stroke: .512"
        • Gallons Per Minute: 3.5
        • Pounds Per Square Inch: 4000
        • RPM: 3400
        • Made By: An OEM supplier
        • Packaging Type: OEM package
        • Triplex plunger pump with hollow shaft
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-454
        General Pump Pressure Washer Pump
        General Pump ET1506G6

        PART NUMBER: 030-454

        SN:

        PART DESC: General Pump Pressure Washer Pump

        Model Year:

        Details
        Cat. Page #:
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: ET Series Pump
        • Bore: .591"
        • Stroke: .283"
        • Gallons Per Minute: 3.2
        • Pounds Per Square Inch: 2610
        • RPM: 3400
        • GHP: 8.6
        • Made By: An OEM supplier
        • Packaging Type: OEM package
        • Triple plunger pump
        Model Listings
        Part Listings

        NEW

        Read Reviews
        030-458
        General Pump Pressure Washer Pump
        General Pump EP1313G8

        PART NUMBER: 030-458

        SN:

        PART DESC: General Pump Pressure Washer Pump

        Model Year:

        Details
        Cat. Page #:
        Pack Size:ea
        Qty / Unit:1
        Model Specs
        • Type: EP Series Pump
        • Bore: .512"
        • Stroke: .512"
        • Gallons Per Minute: 4.0
        • Pounds Per Square Inch: 4000
        • RPM: 3400
        • GHP: 16.4
        • Size: 1"
        • Made By: An OEM supplier
        • Packaging Type: OEM package
        • Triplex plunger pump
          Sort by: